series ip

Applications

This series of capacitors have been designed for A.C. applications where reduced dimensions, high reliability and low cost is required.
In general they are used for the following applications:-

· Running capacitors for single phase motors.
· Running capacitors for three phase motor working as single phase.
· Power factor correction of small loads, e.g. gas discharge lamps, small single phase welding equipments, etc.

Construction

The capacitors are housed in plastic cans with plastic covers. The material used to fill and fix the capacitor into the can is a thermosetting resin having high stability at high temperatures. The capacitors can be

supplied with or without mounting stud, with double terminals 6.3 mm, single terminals 6.3 mm, mini terminals, 2.8 mm or a two core cable or two single core cables. The capacitors having cables are also filled and sealed with thermosetting resin, without plastic cover.

Protection Grade

IP 00 for types with terminals.
IP 55 for types with cables.

MPP FILM CAPACITORS IN PLASTIC HOUSING
DIMENSIONS AND AVAILABLE CONFIGURATION

CN	HPF MS 250Vac HPF MS 330 Vac HPF QV 400 Vac			HPF MS 360 Vac HPF NT 400 Vac HPF PU 450 Vac			HPF MS 400 Vac HPF NT 450 Vac HPF QV 500 Vac
UF	Part No	Dimensions		Part No	Dimensions		Part No		Dimensions
	1.P.6.A	Dia	H	1.P. 7.D	Dia	H	1.P.8.G	Dia	H

1 1.5	. 015.B.x.y.	30	55	.015.B.x.y.	30	55	.010.B.x.y. .015.B.x.y.	30 30	55 55
1.6	.016.B..	30	55	.016.B..	30	55	.016.B..	30	55
2 2.2 2.5	.020.B.. .022.B.. .025.B..	30 30 30	55 55 55	.020.B.. .022.B.. .025.B..	30 30 30	55 55 55	.020.B.. .022.B.. .025.B..	30 30 30	55 55 55
3 3.15 3.3	.030.B.. .032.B.. .033.B..	30 30 30	55 55 55	.030.B.. .032.B.. .033.B..	30 30 30	55 55 55	.030.B.. .032.D.. .033.D..	30 35 35	55 55 55
3.5 4 4.5	.035.B.. .040.B.. .045.B..	30 30 30	55 55 55	.035.B.. .040.D.. .045.D..	30 35 35	55 55 55	.035.D.. .040.D.. .045.D..	35 35 35	55 55 55
5 6 6.3	.050.B.. .060.D.. .063.D..	30 35 35	55 55 55	.050.D.. .060.F.. .063.F..	35 35 35	55 68 68	.050.F.. .060.F.. .063.F..	35 35 35	68 68 68
7 7.5 8	.070.F.. .075.F.. .080.F..	35 35 35	68 68 68	.070.F.. .075.F.. .080.F..	35 35 35	68 68 68	.070.F.. .075.F.. .080.F..	35 35 35	68 68 68
8.5 9 10	.085.F.. .090.F.. .100.F..	35 35 35	68 68 68	.085.F.. .090.F.. .100.F..	35 35 35	68 68 68	.085.F.. .090.H.. .100.H..	35 40 40	68 68 68
12 12.5 14	.120.F.. .125.F.. .140.F..	35 35 35	68 68 68	.120.H.. .125.H.. .140.H..	40 40 40	68 68 68	.120.L.. .125.L.. .140.L..	40 40 40	92 92 92
15 16 18	.150.H.. .160.H.. .180.H..	40 40 40	68 68 68	.150.L.. .160.L.. .180.L..	40 40 40	92 92 92	.150.L.. .160.L.. .180.L..	40 40 40	92 92 92
20 22 25	.200.L.. .220.L.. .250.L..	40 40 40	92 92 92	.200.L.. .220.L.. .250.N..	40 40 45	92 92 92	.200.N.. .220.N.. .250.Q..	45 45 50	92 92 92
25 30	.300.L..	40	92	.300.N..	45	92	.250.P.. .300.Q..	45 50	117 92
30							.300.P..	45	117
31.5 31.5 35	.315.N.. .350.N..	45 45	92 92	.315.Q.. .315.P.. .350.Q..	50 45 50	92 117 92	.315.S.. .315.P.. .350.S..	55 45 55	92 117 920
35	.			.350.P..	45	117	.350.R..	50	117
40 40	400.N..	45	92	.400.S.. .400.P..	55 45	92 117	.400.R..	50	117
45 45 50	.450.Q.. .450.P.. .500.Q..	50 45 50	92 117 92	.450.S.. .450.R.. .500.R..	55 50 50	92 117 117	.450.T.. .500.T..	55 55	117 117
50 55 55	.500.P.. .550.S.. .550.P..	45 55 45	117 92 117	.550.T..	55	117
60 60 65	.600.S.. .600.R.. .650.R..	55 50 50	92 117 117	.600.T.. .650.T..	55 55	117 117
70 75 80	.700.R.. .750.T.. .800.T..	50 55 55	117 117 117

x =

A if Faston 2x 6.3
B if Faston 1x 6.3
C if Faston 1x 2.8
H if Faston 2x 6.3 + Stud
L if Faston 1x 6.3 + Stud
M if Faston 1x 2.8 + Stud
N if Quick Snap without Stud

y = J if Capacitance Tolerance ± 5 %       K if Capacitance Tolerance ± 10 %